When should I use vitrified tiles with skirting board

Vitrified tiles with skriting

If you prefer vitrified tiles or ceramic floors, you may be wondering which socket you should use to combine the floors with the materials used in the walls. The best option for designing floor coverings is a mat that can cover the space between the tiles and the wall, irregularities when the tiles are cut, the edges of the wallpaper or wall panels are different, etc. The skirt is best used when the floor is tiled?

The best option would be to install a vitrified tile base. What is the type of material, how do you choose it, what is its specificity and how is it used? For all these questions, we'll try to give you answers so you can easily restore them for repair.


Manufacturing

The vitrified tile base of the manufacturing process goes through similar steps as normal tiles. The mixture in a clay base is poured into special molds and then pressed. After icing, the options are covered with glaze and baked at high temperature. Therefore, a tile bush of the required shape having high strength values is obtained.

To simplify the process of finding and selecting baseboards and tiles, manufacturers produce both types of series. Therefore, the customer only needs to order the required baseboard from the same company. The length of the tiles and baseboards is often the same, so you can easily place a ceramic bar on the wall while the seams are the same as those on the floor. Some manufacturers also offer elongated options that can be one to two and a half times longer than floor tiles. In this way, it is possible to significantly reduce the number of seams, thereby ensuing the integrity of the line.

Some builders offer as an alternative to the finished base simply to cover the wall with thin strips of cut floor panels. But this option has a number of shortcomings: irregular edges,danger of cutting against sharp edges, fragility and time required for cutting

The main argument for using a milling cutter instead of a socket is cheap, but it should be prepared in advance to take into account the cost of cutting and the risk of scratch damage and the cost of a product.

Advantages of Vitrified tiles sleeves

If you choose the material for the connection of floor and walls, you can choose different sockets of plastic, metal, laminate, etc. But only to combine the tiles with the walls, even the ceramic version is the best choice:
It is not afraid of moisture, so it is good for the kitchen, the bathroom, the shower and the toilet where this tile is used
It has no molds and fungi
For easy-care ceramics, dirt does not stick, stains can be easily removed from the surface and so on.
It does not deform due to humidity and temperature
Such a material is pretty strong and strong
Matches well with wall and floor surfaces

This number makes vitrified tiles strips so popular and unique in terms of the combination of walls and floor. It should be noted that this deserves attention - it pays to be careful and to be attentive to the transport and packaging process. But in operation.
    
How do I choose a base?

If the manufacturer does not offer baseboards for your flooring, but you still opt for this option, that's not the problem. You can see it in the tone and texture of the floor, but under the walls, or in contrast to them, you get very original design solutions. Therefore, you can afford to experiment and choose non-standard tandems for floors and baseboards or slats and walls.
If you still choose a tile, follow the rule: the maximum allowable color difference - a single tone. You are not upset by a bad combination.
As for the height of the floor, it must be selected individually according to the size of the room, the length of the walls, the color of the floor, etc.

Where is the ceramic base used?
Finding a base is good for the following rooms:Cook, bathroom, WC, stairs, offices, Corridors, etc.
In the kitchen, where there is a good chance that water or food will reach the floor and the walls, it is necessary that the pedestal is not afraid of such influences. Bathrooms and toilets are places where high humidity or fungal danger is unavoidable. Therefore, all materials, including the base, should not absorb moisture and odors, be intimately bonded to other surfaces, and be easy to clean.

The base of the steps is a great way to protect the walls from footprints and to create a beautiful telescope over the steps. To complete the production of flat corners that frame the steps.
Commercial spaces and corridors are mainly public places where people can stay, carts and important goods can travel, etc. In general, not all materials are sufficiently resistant to mechanical stress, but the ceramic base is characterized by its high strength and hardness. In addition, unlike many other blades, it has neither shock nor friction

The principle of foundation is quite simple, especially if you have already mastered it with a vitrified tile floor.
Before inserting the surface is leveled, possibly crushed, then a special adhesive mixture is applied. The same materials are used as for the tiles: cement, epoxy, etc
If the room where the tiles are laid is very wet or may fall, use moisture resistant adhesives.
Place the base like a tile on a wall, use a layer and keep the same distance between the elements. To do this, you must use special tears in the form of crosses.

Very often, the base of the profile has a triangular shape to adjust the space between the wall and the floor to allow a smooth transition. But manufacturers offer the same width and a flatter edge with a rounded tip. These types are useful when you need to press the furniture or fixtures against the wall or when a wide edge of the base prevents the doors from closing.

After installation, the seams must be cleaned. Again, it is recommended to use mortar similar to those you have chosen for the floor. Color the grout according to the color of your floor. To avoid staining on the walls, use tape and immediately remove glue and mortar residue from the floor.
To properly construct the bumps on the walls, the manufacturers offer outside or inside angles, but sometimes these products are not within the range. Therefore, you must cut the socket at a 45-degree angle to achieve sharp connections in the corners.

We show you the characteristics of this type of base, like ceramics. We hope that this information will be useful to you and that you will be able to select a quality material that suits you.
This kind of combination of floor and walls is elegant and original. In any repair it can be useful to highlight the elegance and originality of the interior.