Filler grout for durability

Bad tile grout fillers will damage the tile itself
 

Tile grout filler serves to fill the gap between the tiles that the gap is at least 2 mm which makes the tiles glue to each other and also to beautify the tiles and especially strengthen the tiles by preventing popping up on the tile.

Tile or soil fillers called Tile Grouts are material components for floor or wall coverings made of ceramics, vitrification tiles, or mosaics.

This tile filler is different from the cement that has a hard texture and brittle after dry. Unlike grout tiles that are flexible and not easy to crack, not easy to dirty, anti fungal and also a lot of color choices.



For wet areas such as bathrooms there is usually an additional bonding agent for grout fillers on tiles that serve to increase strength and also add waterproof grout. For certain products standard grout fillers for dry areas and for wet areas with heavy duty tiles.

Tile fillers are widely available in the market including in packs such as 1 kg. For dispersion of tile grout for 1.9 m2 grout fillers for 20 x 20 tiles for 30 x 30 tiles for an area of ​​2.85 m2 and so on can be seen in the instructions.

tile grout can be damaged because of the time of execution such as mortar that is too thin so it will decrease the quality of the grout and result grout easily cracked after dry. Another cause is exposure to chemicals, especially floor cleaners that contain certain chemicals that damage the tile grout. If the damaged tile grout should be repaired immediately as it eases the tile will crack or break and damage the anesthetics of the room.

For that the grout on the tiles should not be underestimated. Most people consider flooring is affected by the base below. Though the installation of grout on the tile is very influential. Poor grout quality can cause tiles regardless of installation. Floor tiles are also easily removed if the grout is not fitted properly.

The notion that narrows grout will makes the tiles on the floor will lasts long. Precisely grout installed should not be too tight. Set the grout on the tile less dense. Consider the grout width on the tile n approximately 3 mm so that the floor is not easily dislodged and durable. The thickness of the grout should also be adjusted to the thickness of the tile. Grout is also not too thick because it causes the grout does not come down and just on the surface only.

Laying grout should also be up on the floor because it will affect the resilience of the floor itself. To make the floor dough is used special cement specially designed for the floor. The use of ordinary cement for grout is not recommended because it is not waterproof so it can lead to the growth of mold and mildew to affect the appearance and durability of the tile itself.

Often we also see exfoliation from grout. This happens because of an error at the beginning of the work. The reason for using conventional cement. The mixture is also uneven, so the hard cement grains arise due to the difficulty of cement enter and adhere well, especially if the small grout because the grain of cement produced more coarse and less adhesive power is reduced.

For that need to note the application of the right product to obtain maximum results and tiles are installed can also be durable.
Specific grout fillers have advantages that are resistant to other substances and are suitable for high activity and will not pop up when there is a shift in the soil.