How to cut ceramic tile in place

How to cut  tile in place depends on the cutting tool  

Cutting tiles can use a simple tool by hand or with a different maximum precision cutting tool and make sure to wear protective equipment before doing the cutting
When you work on the edges of the floor, bathroom walls, or the kitchen there is often the problem of how to cut the tiles at home and what tools are used.

Actually it depends on what material will be cut, ceramics, porcelain or granite including vitrification tiles. For bathrooms such as granite is the most commonly used material for coating in bathrooms and kitchens. The need to cut the material is needed to adjust the existing pieces on the wall or floor.

To use cutting tools must already know how to use it because there are also tools cutting tool using special technology.
Cutting and drilling can also be used with different technologies.

To cut the tool tiles used are very much found in the market, especially the type of mechanic. You simply line the tiles with a straight line and are the parts to be cut by placing on a special knife to provide the required pieces.

As for cutting granite also by pressing a special pen. To get a clean cut and a high quality blade tool should be sharp and smooth. Each cutting tool also has the maximum precision.

Use an iron ruler tool to make it almost clear. If cutting tiles in large quantities then you can make a measuring mall to accelerate the ruling.
Make sure the ruler's eye are still sharp, including the handle of the ruler in a strong state.

Tiles to be cut should be placed in a flat place. If the cut tool has its own table to place the crown it will get better and make sure its table also holds firmly.

Place the turret on the tile surface to be cut. Make sure the ruler edge is right on the already created line on the tile. Check back end to end.

Make your body position nice when drawing the line. Hold the cutter and place it on the ruler's eye on the tile surface since it is to be cut.

Pull the tile ruler from tip to tip by keeping the blade of the blade on the ruler of iron which is fixed in the ruler position. The depth of the blade ruler's eye depends on the thickness of the tile to be cut.

The blade is placed furthest away from the tile position to be cut with a mark that has been made on the equipment if there is nothing in the tool then you can make your own. Then pull along the tiles you will cut on the tile surface.
Use the legs on the cutting tool. Press the tile down until it is clipped along the created line.

It is an example of one of the many cutting tools in the markets that are useful for cutting tiles in place. Actually there are still many tile cutting tools depending on each type of cutting tool. From simple cutting tools to the most cutting tools.

It's just that you need to remember when you do the tile cutting does not forget to wear protective equipment such as gloves, eye glasses, mask mouth mask and do not forget to provide drugs if any of you are injured.

Try cutting done outside the house despite the necessary tiles in the house. The remaining tiles that have been cut do not immediately discarded the possibility can still be used for other purposes.